By Lukie Pieterse, Editor and Publisher of Potato News Today
An impressive field yield does not automatically become an impressive quantity of saleable potatoes. Between lifting and the customer’s kitchen or processing line, tubers face repeated physical challenges. Soil must be separated, loads transferred, surfaces cleaned and potatoes graded and packed. Quality can be lost at every stage.
That makes harvesting and handling performance a practical breeding question. Could a variety retain its skin more reliably, suffer less internal bruising or deliver more of its crop in the sizes buyers want—while preserving yield, flavour and preparation quality?
Published research provides opportunities to investigate these improvements. Translating them into commercial benefits requires evaluation throughout the intended route to market. A useful measure of success is the amount of acceptable product recovered, with operating conditions and costs clearly understood.
Start with the product and its destination
There is no single ideal potato for handling. A small yellow potato sold whole with its skin, a baking russet and a potato destined for French fries have different requirements. Characteristics that suit one market may undermine another.
A useful starting point is to define the product before deciding which handling traits to improve. That specification should identify the market, harvest window, storage period and operations between lifting and final acceptance. The endpoint might be a retail pack after distribution or acceptable finished product after processing.
Comparisons also need to reflect that destination. A promising small-potato selection should be tested against a commercial reference serving the same product. Comparing it with an unrelated market class could produce a favourable result with little relevance to adoption.
The question is whether a candidate improves an identified weakness within a workable production system. This keeps selection connected to commercial needs without assuming that every potato should have the same shape, size or skin characteristics.
Identify the damage before selecting against it
Bruising is often discussed as though it were one trait. Different injuries, however, require different measurements.
Skinning involves loss or loosening of protective surface tissue. Shatter bruising involves cracks, while blackspot develops as internal discoloration following mechanical injury. Pressure-related damage reflects a different loading history from a brief impact.
University of Idaho Extension describes tools and methods for identifying shatter and blackspot damage. Colorado State University Extension explains blackspot’s biochemical basis and the influence of tuber condition and handling. Both support identifying the actual problem before choosing a response.
For breeders, combining every defect into one score can conceal useful differences. A selection may retain its skin well but remain susceptible to internal discoloration. Relatively little darkening also does not, by itself, demonstrate less physical injury.
Breeding trials should therefore record important defects separately, including their incidence and severity. Appearance immediately after handling is an incomplete measure when symptoms can develop later.
Skin protection and wound healing need separate attention
Skin colour and skin adhesion are distinct characteristics. An attractive red or russet surface does not establish that a tuber will withstand a particular harvest and washing sequence.
Research by Maria Caraza-Harter and Jeffrey Endelman, published in Crop Science in 2020, illustrates how these traits can be measured. Researchers photographed potato material after mechanical harvest and grading to quantify skinning and skin colour, demonstrating an approach that supports more consistent assessment and genetic investigation.
The commercial implication is to examine presentation after the relevant operations. An unwashed sample cannot fully represent a washed retail pack. Maturity also needs recording because a genotype’s handling response can change with harvest stage.
Recovery after injury is another consideration. Research documented by USDA’s Agricultural Research Service shows that wound-healing ability declines as tubers age in storage. Performance near harvest therefore cannot establish equivalent recovery after damage during later unloading or packing.
A variety intended for storage should consequently be assessed at relevant dispatch dates, with enough material retained to complete later handling and food-quality comparisons.
Genetic research offers opportunities without removing uncertainty
Research supports continued selection for improved bruising response, but molecular findings need careful interpretation.
A 2023 study led by Olivia Angelin-Bonnet combined genomic and gene-expression information from a tetraploid breeding population. It identified regions and candidate mechanisms of interest, including processes associated with cellular strength and sensing mechanical force.
Some of the highest-scoring associations highlighted by the authors were not statistically significant. The researchers emphasized the need for further validation. Their findings provide opportunities for investigation rather than a completed diagnostic test for commercial durability.
Genomic information may help identify promising parents or prioritize material for testing. It cannot establish that a resulting variety will withstand a particular harvester, washing line or distribution route.
Controlled challenges remain useful for comparing responses under defined conditions. Commercial trials must then determine whether an advantage persists through normal operations, including variation in crop condition and mechanical exposure.
Shape and size must serve the intended market
Tuber geometry influences both the product being sold and its interaction with equipment. Length alone is insufficient: width, thickness, irregular contours and eye depth may also matter to grading, preparation and product recovery.
A 2024 study by Jaebum Park, Jonathan Whitworth and Richard Novy examined shape, tuber size and specific gravity in a russet-skinned tetraploid mapping population. The research used 190 individuals and two years of field data, including length-to-width and width-to-depth measurements. The latter captured flatness that a simple round-to-long description can overlook.
These findings support more precise selection, while remaining specific to the material investigated. A shape-associated genomic region does not establish improved performance through every grading system.
Size distribution also needs commercial interpretation. Uniformity has limited value if production is concentrated outside the buyer’s preferred grades. The useful comparison is acceptable recovered output, with other grades and losses accounted for.
For small potatoes, these distinctions are particularly important. Their dimensions and skin-on presentation can be central to the product. Enlarging them merely to suit existing machinery would change the breeding objective.
Trials should follow the actual commercial size range through lifting, separation, washing and packing. Equipment retention matters alongside damage: examining only successfully retained tubers can overlook potatoes lost earlier.
Size-matched samples can investigate biological differences between candidates. Samples retaining each candidate’s commercial size distribution can show what the business would actually handle. Both comparisons are valuable, provided their different purposes remain clear.
Measure hidden injury and automation performance carefully
Hidden damage complicates decisions because symptoms may appear after additional handling. Earlier assessment could help operators identify a damaging stage sooner.
Research by Rabecka Hendricks and colleagues, published online in November 2025 and appearing in a 2026 issue of the American Journal of Potato Research, examined bruise development in Russet Burbank, Ranger Russet and Russet Norkotah under controlled impacts and holding temperatures. More than 70% of eventual blackspot incidence was observed after four hours, depending on cultivar and impact conditions.
That supports investigation of earlier checks under validated conditions. It does not establish a universal four-hour clearance test.
Non-destructive methods offer another opportunity. A 2024 study documented by USDA ARS investigated visible and near-infrared spectroscopy for classifying internal defects. Commercial application still requires validation across the varieties and conditions encountered, including assessment of missed defects and false rejections.
Imaging can also improve measurement on working machinery. Research by Pieter Blok and colleagues, published in Computers and Electronics in Agriculture in 2025, investigated reconstructing three-dimensional tuber shape from partial camera views on an operational harvester to improve volume estimation. That is a measurement advance; it does not establish internal quality or bruise resistance.
Packing compatibility likewise extends beyond recognizing a potato in an image. Feeding, separation, weighing and discharge all need assessment. Trials should record interruptions, manual intervention and material that cannot be handled reliably, followed by quality checks after a suitable interval.
Equipment adjustment may sometimes preserve a valued product more effectively than changing its shape. Evaluation should leave that possibility open.
Build the business case from accepted output
A practical evaluation framework would connect field assessments, controlled challenges and commercial trials through traceable crop lots.
Candidates should be compared under common handling conditions and, where appropriate, under practical adjustments specific to each variety. The first comparison helps identify differences in response. The second investigates achievable performance, with additional labour, equipment and scheduling requirements included in the cost account.
Commercial calculations should follow accepted output and the destination of other material. Lower rejection and increased saleable mass may describe the same improvement; counting both separately would exaggerate value. Potatoes diverted to another food market should also be distinguished from material discarded.
Throughput needs a quality measure. Moving more tonnes per hour is not automatically progress if rejection rises. Accepted output per operating hour, alongside relevant costs, provides a clearer comparison.
These are proposed evaluation methods, rather than evidence that a breeding programme has already delivered a particular saving. Environmental claims similarly require measured changes in inputs and outcomes.
Bring the people handling the crop into the conversation
Harvester operators, storage teams, packers and processing staff observe different aspects of a variety’s performance. Their experience can help identify where trials should look more closely.
Those observations become more useful when linked to crop lot, size range, harvest condition, machine setting and the consequence observed. This helps distinguish a recurring weakness from a problem confined to one set of circumstances.
Breeding programmes should capture that knowledge alongside consistent measurements. Trial procedures also need to fit the working day, with clear responsibility for samples, records and later assessments.
The opportunity is a variety whose advantages can be demonstrated where people actually grow, store and pack potatoes. Its contribution should be visible in acceptable food reaching the intended market, with eating or processing quality preserved and operating requirements understood. That gives growers and their commercial partners a practical basis for adoption.
Sources consulted
- University of Idaho Extension (2020). Monitoring Tools for a Potato Bruise Prevention Program.
- Colorado State University Extension (2019). Blackspot Bruise in Potatoes.
- Caraza-Harter and Endelman (2020), Crop Science. Image-based phenotyping and genetic analysis of potato skin set and color.
- Kumar and colleagues (2010), Planta. Age-related loss of wound-healing ability.
- Angelin-Bonnet and colleagues (2023), BMC Plant Biology. Genetic components of tuber bruising.
- Park, Whitworth and Novy (2024), Frontiers in Plant Science. Genetic mapping of tuber shape, size and specific gravity.
- Hendricks and colleagues (online 2025; journal issue 2026), American Journal of Potato Research. Cultivar, impact and temperature effects on bruise development.
- Semyalo and colleagues (2024), Agriculture. Non-destructive measurement of internal potato defects.
- Blok and colleagues (2025), Computers and Electronics in Agriculture. Three-dimensional tuber shape completion on a harvester.
Discover more from Potato News Today
Subscribe to get the latest posts sent to your email.





























